Alkyia Valorant Settings
Alkyia's eDPI is 456. Enter your mouse DPI to get the sensitivity that matches exactly.
Technical Aim Analysis & Sensitivity Math for Alkyia
Alkyia is a professional Valorant player currently competing for Karmine Corp GC. To maintain peak mechanical aim and crosshair stability in VCT competitions, Alkyia uses a Razer DeathAdder V4 Pro Blackconfigured with a DPI setting of 100 and an in-game sensitivity of 0.57. This yields an Effective DPI (eDPI) of 456.
Physical Mouse Distance (360° Turn): At an eDPI of 456, executing a complete 360-degree in-game rotation requires approximately 67.3 cm (or 26.5 inches) of physical mousepad movement. This places Alkyia's sensitivity in the High eDPI (Wrist Aiming) category, which optimizes micro-adjustments for long-range engagements while retaining enough speed to check corners.
Beyond sensitivity math, Alkyia pairs their mouse with a 1000Hz display refresh rate and a resolution of 1920x1080 to minimize input latency. Below is the full breakdown of gear, including monitor refresh rate, keyboard switches, and official crosshair import code used by Alkyia.
Crosshair Settings
0;s;1;P;o;1;d;1;f;0;s;0;m;1;0b;0;1b;0;S;c;5;s;0.654;o;1In VALORANT: Settings → Crosshair → Import Profile Code
Preview with different backgrounds →Gear & Setup
Full Mouse Settings
Alkyia gear breakdown: what each piece actually changes
Mouse: Razer DeathAdder V4 Pro Black at 1000Hz polling. At 1000Hz the mouse reports every 1ms, which is the competitive baseline — stable on any modern CPU with Raw Input Buffer enabled. DPI 100 with sens 0.57 means the in-game multiplier does the fine work while the sensor stays in its clean tracking range.
Display: Alienware AW2523HF at 1920x1080. Lower resolutions like 1280x960 stretch targets wider and can make heads feel easier to hit, at the cost of peripheral clarity; native 1920x1080 keeps UI and minimap sharpest. Pair this with multithreaded rendering on, V-Sync off, and NVIDIA Reflex on+boost if available — frame latency matters more than texture detail for holding angles.
Supporting gear: Razer Huntsman V3 Pro TKL 8KHz Green for movement keys, Razer Gigantus V2 under the mouse, and Razer BlackShark V3 Pro Black for footsteps, none of which change eDPI, but all of which change consistency: a familiar pad glide and audible footsteps cut down unforced errors more than any sens tweak. If you copy one thing, copy the eDPI (456), not the brand names.
Alkyia crosshair explained: Green with center dot, inner lines off, outer lines off, outlines on
Import code: 0;s;1;P;o;1;d;1;f;0;s;0;m;1;0b;0;1b;0;S;c;5;s;0.654;o;1. In plain terms this is a Green with center dot, inner lines off, outer lines off, outlines on setup. Small inner-line crosshairs like this reward centered head-height placement — you see more of the target around the lines, which helps one-taps at range. The tradeoff is visibility on bright maps (Icebox snow, Breeze sand): if you lose the lines, switch the color to cyan or green rather than enlarging the gap, which would cost precision.
To try it: copy the code above, then in Valorant go to Settings → Crosshair → Import Profile Code, paste, and test in the Range against strafing bots before taking it into ranked. Full per-background preview lives on the crosshair preview page.
Alkyia vs other pros: same game, different mousepad math
Alkyia at 456 eDPI is 176 points above the pro average (280). As a high-sensitivity wrist aimer, Alkyia needs roughly 6.7 cm per 360° turn — plan mousepad space around that number, not around anyone else's brand of mouse.
| Player | Team | DPI | Sens | eDPI |
|---|---|---|---|---|
| Alkyia (you are here) | Karmine Corp GC | 100 | 0.57 | 456 |
| TenZ | T1 | 1600 | 0.195 | 312 |
| aspas | MIBR | 100 | 0.4 | 320 |
| ZmjjKK | Edward Gaming | 800 | 0.395 | 316 |
Reading the table: lower eDPI favors calm angle-holding and spray control; higher eDPI favors entry swings and fast clears. None is "best" — pick the row whose turn-distance fits your desk, then use the converter at the top to match it on your own DPI.
How to copy Alkyia's settings without ruining your aim
- Match eDPI first. Enter your DPI in the converter above and set the sens it gives you — that reproduces Alkyia's turn-distance exactly.
- Keep your old crosshair for one session if Alkyia's lines feel alien; change sens and crosshair on different days so you know which change helped.
- Set scoped sens to 1 only if you play the same scoped weapons; otherwise leave yours — scoped multipliers are personal.
- Give it 3–5 ranked games, then adjust in 5–10% steps. One bad deathmatch is not data.
Data on this page is compiled from public pro-settings listings and community-verified corrections (see Suggest an edit above — 3 matching votes auto-updates a field). Last reviewed against our settings snapshot; if a value changed on stream, submit the correction and it ships after review. Source listing on ProSettings.net ↗
Alkyia settings FAQ
What sensitivity does Alkyia use?
Alkyia plays on 100 DPI with 0.57 sens — eDPI 456, scoped 1.
What is Alkyia's crosshair code?
0;s;1;P;o;1;d;1;f;0;s;0;m;1;0b;0;1b;0;S;c;5;s;0.654;o;1 (Green with center dot, inner lines off, outer lines off, outlines on).
What mouse does Alkyia use?
Razer DeathAdder V4 Pro Black Polling rate 1000Hz.
Should I copy Alkyia's eDPI of 456?
Only if the turn-distance fits your space: about 6.7 cm per 360°. Match eDPI with the converter, test 3–5 games, then tune ±10%.
