keznit Valorant Settings
keznit's eDPI is 276.8. Enter your mouse DPI to get the sensitivity that matches exactly.
Technical Aim Analysis & Sensitivity Math for keznit
keznit is a professional Valorant player currently competing for Team Envy. To maintain peak mechanical aim and crosshair stability in VCT competitions, keznit uses a Razer DeathAdder V4 Pro Blackconfigured with a DPI setting of 100 and an in-game sensitivity of 0.346. This yields an Effective DPI (eDPI) of 276.8.
Physical Mouse Distance (360° Turn): At an eDPI of 276.8, executing a complete 360-degree in-game rotation requires approximately 110.9 cm (or 43.7 inches) of physical mousepad movement. This places keznit's sensitivity in the Medium eDPI (Hybrid Aiming) category, which optimizes micro-adjustments for long-range engagements while retaining enough speed to check corners.
Beyond sensitivity math, keznit pairs their mouse with a 2000Hz display refresh rate and a resolution of 1920x1080 to minimize input latency. Below is the full breakdown of gear, including monitor refresh rate, keyboard switches, and official crosshair import code used by keznit.
Crosshair Settings
0;p;0;c;1;P;c;5;h;0;0l;2;0o;1;0a;1;0f;0;1b;0In VALORANT: Settings → Crosshair → Import Profile Code
Preview with different backgrounds →Gear & Setup
Full Mouse Settings
keznit gear breakdown: what each piece actually changes
Mouse: Razer DeathAdder V4 Pro Black at 2000Hz polling. At 1000Hz the mouse reports every 1ms, which is the competitive baseline — stable on any modern CPU with Raw Input Buffer enabled. DPI 100 with sens 0.346 means the in-game multiplier does the fine work while the sensor stays in its clean tracking range.
Display: ZOWIE XL2566X+ at 1920x1080. Lower resolutions like 1280x960 stretch targets wider and can make heads feel easier to hit, at the cost of peripheral clarity; native 1920x1080 keeps UI and minimap sharpest. Pair this with multithreaded rendering on, V-Sync off, and NVIDIA Reflex on+boost if available — frame latency matters more than texture detail for holding angles.
Supporting gear: Wooting 60HE+ for movement keys, Pulsar eS Saturn Pro Black under the mouse, and HyperX Cloud III for footsteps, none of which change eDPI, but all of which change consistency: a familiar pad glide and audible footsteps cut down unforced errors more than any sens tweak. If you copy one thing, copy the eDPI (276.8), not the brand names.
keznit crosshair explained: Cyan no center dot, inner lines (length 2, offset 1), outer lines off, outlines off
Import code: 0;p;0;c;1;P;c;5;h;0;0l;2;0o;1;0a;1;0f;0;1b;0. In plain terms this is a Cyan no center dot, inner lines (length 2, offset 1), outer lines off, outlines off setup. Small inner-line crosshairs like this reward centered head-height placement — you see more of the target around the lines, which helps one-taps at range. The tradeoff is visibility on bright maps (Icebox snow, Breeze sand): if you lose the lines, switch the color to cyan or green rather than enlarging the gap, which would cost precision.
To try it: copy the code above, then in Valorant go to Settings → Crosshair → Import Profile Code, paste, and test in the Range against strafing bots before taking it into ranked. Full per-background preview lives on the crosshair preview page.
keznit vs other pros: same game, different mousepad math
keznit at 276.8 eDPI is 3 points below the pro average (280). As a mid-range hybrid aimer, keznit needs roughly 11.1 cm per 360° turn — plan mousepad space around that number, not around anyone else's brand of mouse.
| Player | Team | DPI | Sens | eDPI |
|---|---|---|---|---|
| keznit (you are here) | Team Envy | 100 | 0.346 | 276.8 |
| TenZ | T1 | 1600 | 0.195 | 312 |
| aspas | MIBR | 100 | 0.4 | 320 |
| ZmjjKK | Edward Gaming | 800 | 0.395 | 316 |
Reading the table: lower eDPI favors calm angle-holding and spray control; higher eDPI favors entry swings and fast clears. None is "best" — pick the row whose turn-distance fits your desk, then use the converter at the top to match it on your own DPI.
How to copy keznit's settings without ruining your aim
- Match eDPI first. Enter your DPI in the converter above and set the sens it gives you — that reproduces keznit's turn-distance exactly.
- Keep your old crosshair for one session if keznit's lines feel alien; change sens and crosshair on different days so you know which change helped.
- Set scoped sens to 1 only if you play the same scoped weapons; otherwise leave yours — scoped multipliers are personal.
- Give it 3–5 ranked games, then adjust in 5–10% steps. One bad deathmatch is not data.
Data on this page is compiled from public pro-settings listings and community-verified corrections (see Suggest an edit above — 3 matching votes auto-updates a field). Last reviewed against our settings snapshot; if a value changed on stream, submit the correction and it ships after review. Source listing on ProSettings.net ↗
keznit settings FAQ
What sensitivity does keznit use?
keznit plays on 100 DPI with 0.346 sens — eDPI 276.8, scoped 1.
What is keznit's crosshair code?
0;p;0;c;1;P;c;5;h;0;0l;2;0o;1;0a;1;0f;0;1b;0 (Cyan no center dot, inner lines (length 2, offset 1), outer lines off, outlines off).
What mouse does keznit use?
Razer DeathAdder V4 Pro Black Polling rate 2000Hz.
Should I copy keznit's eDPI of 276.8?
Only if the turn-distance fits your space: about 11.1 cm per 360°. Match eDPI with the converter, test 3–5 games, then tune ±10%.
